Scope of works
Wharf Replacement, L’Orignal, ON In general, the work covered under this project includes all labour, all products (i.e.: materials, machinery, equipment and appliances), all construction materials and all services that may be necessary for the execution of the work in accordance with the contractual documents. The project site is located in L’Orignal approximately 90 kilometers east of Ottawa. The work area is located at the end of Wharf Street on the south side of the Ottawa River. Work under this Contract covers, but is not limited to, the following: 1. Demolition and removal of the existing wharf structures and associated infrastructure, including the disposal of demolished materials. 2. Removal, salvage, temporary storage, and reinstatement of the existing boat launch ramp and associated components. 3. Salvage, storage, and reinstallation of existing ballast materials for incorporation into the reconstructed wharf structures. 4. Construction of new timber crib wharf structures, including the supply and installation of structural timber components, decking, curbs, fender systems, mooring hardware, and associated works. 5. Excavation, preparation of foundation areas, placement of geotextile materials, and installation of granular, stone, and erosion protection materials required to support the reconstructed facilities. 6. Construction of reinforced concrete elements associated with the reconstructed wharf and access areas. 7. Site grading, shoreline restoration, reinstatement of disturbed areas, and completion of all ancillary works necessary to provide a fully operational marine facility. 8. Optional Work: a. Supply and installation of one additional timber crib structure. b. Supply and installation of armour stone protection. Before submitting a bid, bidders can visit the site and its surroundings, at their own expense, to review and verify the form, nature, and extent of the work, materials needed for the completion of the work, the means of access to the site, severity, exposure, and uncertainty of weather, soil conditions, any accommodations they may require, and in general shall obtain all necessary information as to risks, contingencies, and other circumstances which may influence or affect their bid. No allowance shall be made subsequently in this connection on account of error or negligence to properly observe and determine the conditions that will apply. Take all appropriate safety measures for any visit to site, either before or after acceptance of bid. The work is proposed to be completed between the months of October 2026 and March 2027.
- Type
- Invitation to bid / open tender
- Tender
- Sector
- Software & IT Services
- Procedure
- Competitive - Open bidding
- Classification
- 72141200
- Original notice
- Sign in to open the original notice